二手CMT16B进口双面抛光机-研磨抛光机详细内容
1.设备主要规格
二手进口抛光机-二手cmt研磨抛光机-双面研磨抛光机/POL机床出售转让
类型 | 项目 | 其他 | |
动力 | 3相220V，50Hz | ||
设备尺寸 | 1800L x1550W x2850H（电气/空气箱除外） | ||
控制 | 触摸屏和PLC控制 | ||
气压 | 5~6Kg/cm?。 | ||
板尺寸 | 波尔 | φ 384 x φ 1140 x55T[SUS410] | |
ts底板 | R.P.M | 46 R.P.M（逆变驱动） | |
发动机 | 7.5千瓦x4P | ||
方法 | 蜗轮（DEC.RATE 1/25）箱式传动 | ||
发动机 | 3.7千瓦x4P | ||
方法 | 蜗轮（DEC.RATE 1/60）箱传动 | ||
部空气压力。 气缸 | φ 180X550ST（低摩擦气缸） | ||
设置工件大小 | sunarscale unitcontrol（研磨） | ||
ts运营商 | 载体尺寸 | P.C.D φ 423.34[Dp=12/Z=200] | |
插入量 | 5EA | ||
工作尺寸 | |||
内齿轮 | P.C.D φ 1185.34[Dp=12/Z=560] | ||
R.P.M | 23R.P.M（伺服电机 驱动器） | ||
发动机 | HC-SFS352[3.5 kW] | ||
方法 | 行星齿轮DEC.DR IVE（de c.rate 1/14） | ||
上下 | 齿轮马达0.4 kW.1/60 | ||
35届 | |||
太阳齿轮 | P.C.D φ 338.67[Dp=12/Z=160] | ||
R.P.M | 29R.P.M（伺服驱 动） | 发动机 | |
发动机 | HC-SFS152[1.5 kW] | ||
方法 | 行星geardec，dr ive（1 2月率1/60） | ||
上下 | 手动操作 | ||
双面抛光机 | 二手进口双面抛光机 |
Product Description
1.Main specifications of the equipment
Type | Items | 0thers | |||
Power | 3 phase 220V,50Hz | ||||
Equipment size | 1800L x 1550W x 2850H(except Elec./AIR box) | ||||
Control | Touch screen &PLC control | ||||
AIR pressure | 5~6 Kg/cm²Max. | ||||
Plate size | POL | φ384 x φ1140 x 55t[SUS410] | |||
Bot tom plate par ts | R.P.M | Max.46 R.P.M(inver ter drive) | |||
Motor | 7.5Kw x 4P | ||||
Method | worm gear (Dec.rate 1/25)box drive | ||||
Top plate par ts | R.P.M | Max.20 R.P.M(inverter dr ive) | |||
Motor | 3.7Kw x 4P | ||||
Method | worm gear(Dec.rate 1/60)box drive | ||||
Top air pres. cylinder | φ 180x 550st(low friction cylinder) | ||||
Work size setting | sunar scale unit control(LAPPING) | ||||
Carrier par ts | Carrier size | P.C.D φ423.34 [Dp=12/Z=200] | |||
Inserting amount | 5EA | ||||
WORK SIZE | |||||
Internal gear | P.C.D φ1185.34 [Dp=12/Z=560] | ||||
R.P.M | Max.23 R.P.M(servo motor dr ive) | ||||
Motor | HC-SFS352[3.5Kw] | ||||
Method | planet gear dec.dr ive (dec.rate 1/14) | ||||
Up-Down | geared motor 0.4Kw.1/60 | ||||
35st | |||||
sun gear | P.C.D φ338.67 [Dp=12/Z=160] | ||||
R.P.M | Max.29 R.P.M(servo dr ive) | motor | |||
Motor | HC-SFS152[1.5Kw] | ||||
Method | planet gear dec,dr ive (dec.rate 1/60) | ||||
Up-Down | manual operation | ||||
20st | |||||
※ Above specification can be changed for the better per formance at any time.
2.Basic things of the equipment
1)Basic concept of the equipment
This equipment uses 4-WAY mode and gives the movement from the 4 mode to the work.
The top and bottom plates,sun gear,and internal gear do the rotation independent ly and it can process both side of the work,so the process stress is small and improves parallel and plane diagram of the work.
4-WAY mode does the planet movement on the plate in full,so the one side wear can be reduced and it is possible to adjust the range of the air pressure using the electric regulator.
With the 4-WAY movement and using accurately calculated gear ratio,the problem that happens to the carrier when keeping and maintaining the work can be reduced.
Through this,the thin carrier can be used and the process of the thin work and longer lifespan of the carrier are possible.
2)Development of the equipment and its character istics
CMT has been developing the precision plane gr inder which improved the basic characteristics of the thin film products.
Especially,we are trying to study and develop the high precision planar ization that can process the crystal,oxide,silicon wafer,thin film glass,etc.thin and securely at the section and both side gr inding device.
0ur both side LAP/POL MACHINE is designed and produced to show its efficiency considering its characteristics as the machine tool.
Meant ime,Europe or Japan made machines have been introduced to Korea but because of their high price it has been hard to invest and some Korean companies introduced but there has been some problems due to their poor efficiency.
In producing this both side LAP/POL MACHINE,we'd Iike to give you some help.Fur thermore, we will try hard to improve our technical skills and improvement of the product.
☑ Cont inuously var iable transmission of LAP/POL top/bottom plate
Top/bot tom plates work separately and they do continuously variable transmit within the Max. 20 R.P.M(top/bottom plates)range through each inver ter drive.The touch screen shows the current R.P.M of the plate.
☑ Cont inuously var iable transmission of internal and sun gears
INTERNAL/SUN gears can do the individual CVT within the internal Gear Max.23 R.P.M/Sun Gear 29 R.P.M range thr ough the servo motor and rotate the gr inding direction of the carrier and work.
☑ Working processor can be applied using the touch screen
To optimize the working condition of each models,it uses the touch screen and inputs and process the pressure,top-bot tom plates rotation,and sun gear rotation data in each step.
二手进口16BCMT双面抛光机
